How To Set Schlage Keyless Entry

The neat thing about having a keypad lock like the Schlage Connect is that you don't need physical keys at all. Instead, yous but enter in a primal code (aka user codes) and you're off to the races. Here'due south how to create and manage key codes for the Schlage Connect smart lock, both on the lock itself and on your phone.

RELATED: How to Install and Set Up the Schlage Connect Smart Lock

Earlier we begin, you'll need to know your lock'due south programming code, which can be found on the back of the interior portion of the unit. You should have jotted it down before installing the lock in the first place, but if not, you'll need to take information technology apart and write down the programming lawmaking. This is required to put the lock into programming way, which allows you to alter and manage the lock's settings.

How to Add a User Code

The Schlage Connect comes with a couple of default codes out of the box, but it'southward all-time to come up with your own code to use.

To become started, open up your door and extend the deadbolt so that it's in the locked position (y'all'll begin all programming this fashion). From there, press down on the Schlage push at the top of the keypad and then enter in your six-digit programming code (over again, y'all'll begin all programming this way).

After pressing the Schlage button and entering in your programming code, press "1" and then enter in the new user code that you want to use twice. So if y'all wanted your new user code to exist 1234, y'all would enter in 12341234. (Note: please don't use 1234 every bit your door code.)

If successful, the dark-green checkmark will glimmer twice and y'all'll also hear 2 beeps. If you get a red 10, press the Schlage push to start over.

To add together a user lawmaking using your telephone, you lot'll outset need to connect the smart lock to a smarthome hub. In my case, I'm using the Wink Hub two along with the Wink app. Have a look at our setup guide on how to exercise this. You lot tin use a different hub, and it should follow a somewhat similar process.

Select your lock in the app and then tap on the arrow off to the right.

You may demand to enter in your Wink password earlier continuing, only once that's done, yous'll go to the User Codes screen. Tap on "Add a User Code".

Type in the new user code. You'll need to enter in twice to confirm.

After that, requite the user code a name, as well equally a reminder if you e'er need to delete it in the most hereafter. Then hit "Washed".

How to Delete a User Code

To delete a user lawmaking on the lock itself, printing the Schlage push followed by the programming code, and and so hitting "2".

After that, enter in the user code that y'all want to delete twice. If successful, you lot'll get a blinking green checkmark and two beeps.

You can also delete all user codes at once by pressing the Schlage button, entering in the programming code, pressing "6", and then entering in the programming lawmaking again. This volition prevent you from unlocking your door with a user code (since there are none) until you create a new user code.

To delete a user code on your phone, tap on the arrow off to the correct to access the lock's user codes. From at that place, tap on the user code that y'all want to delete.

Then tap "Delete This Code".

How to Change the User Code Length

The Schlage Connect allows you to use anywhere from four-digit user codes up to eight-digit user codes. Keep in mind, though, that changing the user code length will also erase all electric current user codes, so you'll take to create new codes after you practise this.

To change the length, press the Schlage button, enter in the programming lawmaking followed past "8", and then hit the number on the keypad that corresponds to the length y'all want to utilise (you'll press this number twice). And so if y'all want six-digit user codes, you'll press 66. If successful, y'all'll go a blinking greenish checkmark and ii beeps.

To change the user code length on your phone, tap on the arrow off to the right to access the lock's user codes and select "User Lawmaking Length".

Select a number between four and eight and and then tap on "Set User Code Length".

Remember, this volition delete all current user codes, then you'll need to go back and create new ones when you do this.

How To Set Schlage Keyless Entry,

Source: https://www.howtogeek.com/331766/how-to-create-and-manage-user-codes-for-the-schlage-connect-smart-lock/

Posted by: pelayobourfere.blogspot.com

Share this post